Preparation; Connections - Panasonic KX-FLB811 Operating Instructions Manual

2For assistance, please visit http://www.panasonic.com/consumersupport Connections and Setup

2 Preparation

2.1 Connections

Caution:
L When you operate this product, the power
outlet should be near the product and
easily accessible.
1 Telephone line cord
L Connect to a single telephone line jack
(RJ11).
2 Power cord
L Connect to the power outlet
(120 V, 60 Hz).
3 [EXT] jack
L You can connect an answering machine
or an extension telephone. Remove the
stopper if attached.
4 Answering machine (not included)
5 Handset unit (Optional) connection jack
L You can connect the optional handset
unit. Remove the seal if attached.
4
6
Note:
L To avoid malfunction, do not position the unit
near appliances such as TVs or speakers
which generate an intense magnetic field.
L If any other device is connected to the same
telephone line, this unit may disturb the
network condition of the device.
For assistance, please visit http://www.panasonic.com/consumersupport
Using the optional handset unit
You can add the optional handset unit (Model
No. KX-FA103). See page 10 for accessory
information.
L Connect to the handset unit connection jack
Using surge protectors
L The warranty does not cover damage due to
If the fax machine shares a single
5
telephone line with a DSL service
Fax transmission/reception may be disturbed,
noise interference may be heard during
telephone conversations, or Caller ID (page 40)
may not function properly. A filter to prevent this
is provided from your DSL provider. Please
attach the filter (7) to the telephone line cord of
the unit.
3
1
2
(5) before use. For more details, please
refer to the installation guide for the optional
handset unit.
power line surges or lightning. For additional
protection, we recommend the use of a surge
protector (6).
2. Preparation
7
21