Storing Caller Information - Panasonic KX-FLB811 Operating Instructions Manual

To edit a telephone number before calling
back
Press {*} repeatedly after step 2. Each time
you press {*}, the telephone number will be
changed as follows:
1 1 - Area code - Local telephone number
("1" added)
2 Local telephone number only (area code
omitted)
3 Area code - Local telephone number
4 1 - Local telephone number ("1" added
and area code omitted)
To stop viewing
Press {STOP} after step 2.
4.2.1 Erasing all caller
information
1
Press {MENU} repeatedly to display
"CALLER SETUP".
2
Press {SET}.
L "CALL LIST ERASE" will be displayed.
3
Press {SET}.
L To cancel erasing, press {STOP}, then
{MENU}.
4
Press {SET}.
5
Press {STOP} to exit.
4.2.2 Erasing specific caller
information
1
Press {CALLER ID}.
2
Press {V} or {^} repeatedly to display the
desired item.
3
Press {<}.
L To cancel erasing, press {STOP}.
4
Press {SET}.
L To erase other items, repeat steps 2 to 4.
5
Press {STOP} to exit.
4.3 Storing caller
information
L Keep the front cover page open for button
locations.
4.3.1 Into the one-touch dial
feature and navigator directory
Important:
L This feature is not available in the
following cases.
– The telephone number includes data
other than numbers (i.e., * or #).
– The caller information does not
include a telephone number.
1
Press {CALLER ID}.
2
Press {V} or {^} repeatedly to display the
desired item.
3
Press {MENU}.
4
Select the station key or navigator directory.
For stations 1–3:
1. Press the desired station key.
2. Press {V} or {^} repeatedly to select
"DIAL MODE".
3. Press {SET}.
4. Press {SET}.
For stations 4–7:
1. Press the desired station key.
2. Press {SET}.
For stations 8–14:
1. Press {LOWER}, then press the desired
station key.
2. Press {SET}.
For navigator directory:
1. Press {<} or {>}.
2. Press {SET}.
5
Press {SET}.
Note:
L You can confirm the stored items by printing
the telephone number list (page 89).
L The unit can only store a name of up to 16
characters long.
L To edit a name or number, see page 32.
L If caller information does not include the
caller's name, enter the name manually. See
the instructions on page 31.
L If you assign an item to a station key which
already contains an item, the previous item
will be replaced.
L Station 1 to 3 can be used alternatively as
broadcast keys (page 34).
4. Caller ID
41