Advertisement
External Control Panel
•
•
•
•
•
•
•
•
Downloaded From projector-manual.com Acer Manuals
Left/Keystone
Menu
Auto
The Infrared Remote Receiver (Front and Rear) allows the projector to accept
signals from the remote control. For best results, be sure to aim the control
toward the sensor without any obstructions between the two, and at a distance
no greater than 6 meters.
Menu will display the menu system on screen. Press Menu again to access the
sub-menus. Left and Right help you navigate among choices and settings in
the menus and sub-menus. However, when the onscreen menu is not activated,
the Left and Right buttons will function as Keystone +/- hot keys.
Press the Exit button to go back to the main menu. Press Exit again to leave
the menu system.
The Status Indicator will blink or light up when the lamp needs service, cooling
or replacement. See "Status Messages" on page 27. for more detailed
information.
When the projector is on, back-lit Power will blink during warm-up and turn to
solid green to indicate the projector is ready for use.
Press Power for 1 second to turn the projector on or off.
Auto key: Automatically sense the best picture quality for current received
signals.
Source key: Select signal sources, PC, RCA, S-video.
Lamp status
Source
indicator
,QWURGXFWLRQ
$FHU 6OLP
Exit
Right/Keystone
Power
Advertisement
