Download Print this page

Safety Instructions - Acer SL 700X/S User Manual

Advertisement

,1752'8&7,21
TO PREVENT SHOCK, DO NOT OPEN THE CABINET. NO USER –SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. PLEASE
READ THIS USER'S GUIDE BEFORE YOU OPERATE YOUR PROJECTOR. SAVE THIS
USER'S GUIDE FOR FUTURE REFERENCE .

Safety Instructions

1. Read this user's guide before you operate your projector and save it for future
2. The lamp becomes extremely hot during operation. Allow the projector to cool
3. Never replace lamp assembly or any electronic components unless the
4. To reduce the risk of electric shock, do not disassemble this appliance. Take it to
5. Do not place this product on an unstable cart, stand, or table. The product may
6. This product is capable of displaying inverted images for ceiling mount
7. To prevent lamps from bursting, change the lamp after changing the mounting
• Always open the lens shutter or remove the lens cap when the projector lamp is
• Do not look straight at the projector lens during operation. The intense light beam
• In some countries, the line voltage is NOT stable. This projector is designed to
Save this user's guide: The information contained in this manual will assist you in
operating and maintaining your Acer SL700 Series Personal Projector.
Downloaded From projector-manual.com Acer Manuals
Caution
reference.
for approximately 45 minutes prior to removing the lamp assembly for
replacement. Do not operate lamps beyond the rated lamp life. Excessive
operation of lamps beyond the rated life could cause them to explode on rare
occasions.
projector is unplugged.
a qualified technician when service or repair is required. Incorrect reassembly
can cause electric shock when the appliance is subsequently used.
fall, causing serious damage to the product.
installation. Please use suitable equipment for mounting the unit and ensure it is
securely installed.
position of projectors (desktop to ceiling mount or ceiling mount to desktop
mount).
Caution
on.
may damage your eyesight.
operate safely within a bandwidth of 110 to 230 volts, but could fail if power cuts
or surges of ±10 volts occur. In these high-risk areas, it is recommended to install
a power stabilizer unit.
,QWURGXFWLRQ
$FHU 6OLP


Advertisement

loading