Page 1
DLP PROJECTOR SL 700X/S USER’S GUIDE Thank you for purchasing the Acer DLP Projector. Please read this user’s guide to ensure correct use of the device. Save this user’s guide for future reference. Outline This DLP Projector can display various computer signals and NTSC/PAL/SECAM video signals.
±10 volts occur. In these high-risk areas, it is recommended to install a power stabilizer unit. Save this user’s guide: The information contained in this manual will assist you in operating and maintaining your Acer SL700 Series Personal Projector.
In the event this product is found to be defective within the war- ranty period, Acer’s only obligation and your exclusive remedy shall be replacement of any defective parts (labor included). To obtain warranty service, notify the dealer immediately from which you purchased the product of any defects.
$FHU 6OLP Shipping Contents The Acer SL700 Series Projector is shipped with the necessary cables required for standard PC, Macintosh or laptop computer connections. Carefully unpack and verify that you have all the items shown below. If any of these items are missing, please contact your place of purchase..
$FHU 6OLP External Control Panel Exit Right/Keystone Left/Keystone Menu Power Lamp status Auto Source indicator • The Infrared Remote Receiver (Front and Rear) allows the projector to accept signals from the remote control. For best results, be sure to aim the control toward the sensor without any obstructions between the two, and at a distance no greater than 6 meters.
$FHU 6OLP Adjuster There is one adjuster at the bottom of the projector. It raises up the projector when the projected image is offset vertically. 1. Lift the projector up and press the adjuster button to release the adjuster. 2. The adjuster will drop into position and be locked. 3.