Planet Networking & Communication VIP-2 Manual page 13

VoIP Gateway Quick Configuration
VoIP Gateway Quick Configuration
For example:
3. From VIP-450 FXS make call to remote VIP-480
Step 1. Please pick up the telephone handset when listen a dial-tone.
Step 2. Please input a number
Step 3. And then the other side analog telephone should be ring at this time.
Step 4. it begin establish voice communication after pick up the handset.
Note :
1) If wan to connected remote PSTN (VIP-480), please dialed
get a dial-tone from remote PSTN.
2) The Hot-Line dialing method of VIP-450 (Port 1, 3) please refer to the same step of
VIP-480 previously.
3) The mentioned parameters and network settings in this sample be carefully modified to
meet the real-world applications.
www.planet.com.tw
100 or 102
101 or 103, that should be
13 / 13