Use Of Parquet/Carpet Brush; Accessories; Parking The Vacuum Cleaner - Beko BKS 1350 T User Manual

3 Use
1. Plug in the power cord (8) to a suitable mains
supply outlet.
2. Press on the on/off button (1).
You may use suction control to
C
adjust the suction power during
operation. The more you open the
control, the more the suction power
shall be decreased.
Suction
adjustment
slider
3. Press on the on/off button (1) to turn off the
appliance.
Press cord winding button (2) to rewind the
4.
power cord.

3.4 Use of parquet/carpet brush

There is an adjusting mechanism on the left side
of the brush with an indicator for carpet and hard
surfaces.
8 / 57 EN
o n / o f f
button
on/off button
Adjustment
Mechanism
C
You can adjust the brush to a
suitable position to the surface to
be vacuumed with the adjusting
mechanism.
C
Use your brush at normal position
(hair brushes concealed) to clean
carpets and rugs.
C
To clean hard floors such as parquet,
vinyl or linoleum, change the position
of adjustment mechanism and clean
with hair brushes.

3.5 Accessories

1. You can directly attach the required accessory
to the handle firstly by removing the telescopic
tube (15).
2. Accessories can also be attached to the end
of the telescopic extension tube (15) to reach
further points. Remove the floor head and
attach the desired accessories.
Narrow crevice tool: It is used
for narrow places, corners and
cracks
Furniture Brush: It is used for
carpets, flooring, stairs, etc.

3.6 Parking the vacuum cleaner

A hook is available on the floor brush to park the
vacuum cleaner. It is possible to hang the floor
brush to the relevant park position with this hook.
Vacuum cleaner / User manual