Husqvarna 265 ACX Operator's Manual page 68

Fault message
Outside working area
Low battery voltage
Wrong PIN code
PIN code expired
No drive
No contact in charging
station
Charging station
blocked
70 - English
9. TROUBLE SHOOTING
Cause
If this occurs in isolated areas it may
be due to interference from metallic
objects (perimeter fence,
reinforcement bar) or buried cables in
the vicinity.
The working area slopes too much.
The boundary wire has been routed
the wrong way around an island.
The boundary wire is too close to the
edge of the working area.
Automower cannot find the charging
®
station.
The battery is spent.
Wrong PIN code has been entered. Wrong PIN code has been entered. Wrong PIN code has been entered.
Three attempts are permitted, the Three attempts are permitted, the Three attempts are permitted, the
keypad is then blocked for five keypad is then blocked for five keypad is then blocked for five
minutes.
The Time lock (4-1-2) function has
(4-1-2) function has (4-1-2) function has
been activated because the selected been activated because the selected been activated because the selected
number of days has expired. number of days has expired. number of days has expired.
Anti-theft protection in the GPS Anti-theft protection in the GPS Anti-theft protection in the GPS
module has been activated because module has been activated because module has been activated because
the mower is outside the anti-theft the mower is outside the anti-theft the mower is outside the anti-theft
area. area. area.
Automower Automower Automower has got caught in
®
something. something. something.
The working area includes a steep
slope.
The guide wire is not laid at an angle
on a slope.
Automower ® makes poor contact with
the contact strips in the charging
station.
The contact between the charging
strips and contact strips may be poor
and Automower ® has made a number
of charging attempts.
An object is obstructing Automower
Action
Try moving the boundary wire.
Check that the boundary wire has
been routed correctly.
Check that the boundary wire has
been routed in accordance with the
installation instructions.
Check that the boundary wire has
been routed correctly.
Change the search settings Change the search settings Change the search settings
according to the Follow loop in (3-2-2) Follow loop in (3-2-2) Follow loop in (3-2-2)
according to the according to the
on page 53. on page 53. on page 53.
Change the position of the charging Change the position of the charging Change the position of the charging
station. station. station.
Expected life is 1 - 4 years. Contact Expected life is 1 - 4 years. Contact Expected life is 1 - 4 years. Contact
your dealer to replace the battery. your dealer to replace the battery. your dealer to replace the battery.
Enter the correct PIN code. Enter the correct PIN code. Enter the correct PIN code.
This is normal. Enter the correct PIN
code.
Return the mower to the anti-theft
area and enter the correct PIN code.
If the message is displayed in the
intended working area, the anti-theft
area radius needs to be increased.
Free the mower and rectify the
reason for the lack of drive. If it is due
to wet grass, wait until the lawn has
dried before using the mower.
Maximum guaranteed slope is 35%.
Steeper slopes should be isolated.
If the guide wire is laid on a slope, it
must be laid at an angle across the
slope.
Check that Automower
correctly in the charging station.
Place Automower
®
station and check that the charging
strips and contact strips make good
contact.
. Remove the object.
®
® has docked
in the charging