8
98
Place left adjusting plate 2
in the swinging arm and in-
stall quick-release axle 1 in
the brake calliper and the rear
z
wheel. Support the wheel.
Make sure that the quick-re-
lease axle fits into the recess of
the adjusting plate.
Install right adjusting plate 1.
Install nut 1, but do not tighten
it at this point.
Insert the speed sensor into
the bore and install screw 1.
without centre stand
Remove the auxiliary stand.
Adjust chain sag (
Front-wheel stand
Installing the front-wheel
stand
The BMW Motorrad front
wheel stand is not designed
to support the motorcycle
without the assistance of an
auxiliary stand. A motorcycle
OE
89).