8
92
Remove axle screw 1.
Slacken left axle clamping
screws 2.
Push the axle in as far as it will
z
go.
Remove axle 1, while support-
ing the wheel.
Do not remove the grease from
the axle.
Roll the front wheel forward to
remove.
Remove spacing bushing 1
from the left-hand side of the
wheel hub.
Installing front wheel
Possible malfunctions when
ABS and ASC intervene, if
any other wheel but the series
standard wheel is installed.
See the information on the effect
of wheel size on the ABS and
ASC systems at the start of this
chapter.
Threaded fasteners not
tightened to the specified