BMW F 800 GS Adventure Rider's Manual page 96

8
94
Tighten axle screw 1 to the
specified tightening torque.
Axle screw in quick-re-
lease axle, front
z
30 Nm
Tighten left axle clamping
screws 2 to the specified
tightening torque.
Clamp of quick-release
axle
Tightening sequence: Tighten
screws six times in alternate
sequence
19 Nm
If fully tightened beforehand,
slacken right axle clamping
screws 1 again.
Removing the front-wheel
stand.
OE
without centre stand
Remove the auxiliary stand.
Place the right brake calliper
and the left brake calliper onto
the brake disc.