4 Replacement Procedures
Installing the main PCB
To install the main PCB, follow the steps below and refer to Figures 4-25 to 4-30.
1. Securing the bracket to the ODD.
M22.5L
2. Place the Main PCB to the bottom case
3. Install the ODD to the Main PCB
4. Secure the main PCB to the bottom case using the following screws.
M2X3
M2X3
M1.6 X2.5 FLAT HEAD screw
5. Connector the cable to the main PCB.
6. Securing the LVDS cable.
M2X2.5
7. Paste 7 pieces of tape.
SatelliteM500/M500D Maintenance Manual [CONFIDENTIAL]
Downloaded from LpManual.com Manuals
FLAT HEAD screw
FLAT HEAD screw
FLAT HEAD screw
FLAT HEAD screw
2
4
6
1
1
4-43