Silvercrest SRW 2 A1 Operating Instructions Manual page 16

NOTE
► If the 12-hour mode is set, a point appears in the upper right of
the display
♦ Press the TIME button
♦ Press the TIME button
♦ Press or hold the HR/− button
♦ Press or hold the MIN/+ button
♦ Press the TIME button
set.
NOTE
The time is reset to 0:00 if the device is disconnected from the
►
power supply and no batteries are installed.
SRW 2 A1
from midday onwards (PM).
again to accept the settings.
8
again. The time flashes on the display.
8
11
again. The programmed time will be
8
to set the hours.
to set the minutes.
12
GB
IE
CY
13