Warranty Rules; Description And Envisaged Conditions Of Use - Hyundai HYW11120 User Manual

WARRANTY RULES

1) Hyundai high-pressure cleaners are covered with a 1 year warranty for trouble deriving from
manufacturing defects. Warranty does not apply to normal wearing parts, in particular:
pistons, seal rings, gaskets, and electrical components.
Repairs carried out by unauthorized personnel void the warranty.
2) Hyundai obligations are restricted to replacement of defective parts. Replacement or repair
of defective parts depends on the unquestionable decision of Hyundai.
Transport costs and risks, removal and installation of the machines and any
other cost directly or indirectly associated with the repair of this product are not covered by
warranty.
3) All repairs under warranty must be carried out by Hyundai or by a Technical Support Service
authorized by Hyundai. Repairs carried out by unauthorized technicians shall not be
reimbursed. If said repairs cause damage to the machine, this is not covered by warranty.
4) Regular checks, maintenance and tampering are not covered by warranty.
DESCRIPTION
Cold and hot water high-pressure cleaner composed of a metal chassis with castors and a
handle for moving; generator for the production of hot water; diesel burner; diesel tank; steam
exhaust vent; motor-pump for inlet of pressurized water; mains plug-in power supply; power
cable and switchboard; cover and washing spray gun (or other accessories).
ENVISAGED CONDITIONS OF USE
Use
The cleaner has been developed and manufactured for the use in car-washing, body-shops,
workshops, factories, filling stations, farms, etc. If the machine is used in closed rooms, air shall
be supplied and combustion gases evacuated by means of a good exhaust system to avoid
poisoning. To correctly execute these instructions, please contact our authorised technical
service centre.
The use of cleaning machines or other units with electric motors or other equipment, which can
short-circuit because of water contact, IS FORBIDDEN.
Environment
The power supply with minimal IP 54 protection permits use:
- OUTDOORS ON FLAT SURFACES;
- IN DAMP CONDITIONS.
In any case, for safe and easy manual handling, it is necessary for the floor to be as flat and
even as possible. The machine HAS NOT BEEN DESIGNED to be pushed or towed with
mechanical facilities of any kind.
Page 3