Troubleshooting; Before Calling Service - Panasonic DP-200 Operating Instructions Manual

Troubleshooting

Before Calling Service

Unit does not operate
Does the display light?
Does the Energy Saver key flash (or light)
and displays are turned OFF? (See P .24)
Does any of the U## codes and messages
appear on the display?
(U0, U4, U10, U12, U13....etc.,)
Does the add staples indicator and
message appear on the display?
Does the add paper indicator and message
appear on the display? (J)
Does the paper misfeed indicator and
message appear on the display? (c/I/F)
Does E#-## indicator and message appear
on the display?
56
Check Action
Check if the Power Switch is turned On and
if the power plug is inserted into the outlet.
Press Energy Saver key on the control
panel.
Perform actions in accordance with each
message.
Add staples (See P .42)
Remove all jammed staples. (See P .44)
Add paper. (See P .45)
Remove the misfed paper. (See P .48)
Turn the copier off, then on. If the error
code does not clear, call for service.