General Functions For Key Operator - Panasonic DP-200 Operating Instructions Manual

General Functions for Key Operator

No. Modes
00 PAPER SIZE
01 AUTO RESET TIME
02 ENERGY SAVER MODE
03 ENERGY SAVER TIME
04 LANGUAGE DEFAULT
05 SPECIAL TRAY 1
06 SPECIAL TRAY 2
09 KEY/TOUCH BEEP
10 ORIG. SET BEEP
11 ORIG. SET BEEP ADF On
14 DEPT. COUNTER MODE
20 DATE & TIME
21 DAYLIGHT TIME
22 TCP/IP ADDRESS
23 TCP/IP SUBNET MSK
24 TCP/IP G/W ADDR.
C It is necessary to input the Key Operator ID code before changing items on
NOTE
this page.
C The Special Tray 1 and 2 are not auto-selectable in the switching mode.
Not needed in copying mode, but needed when installing options for
advanced functions (see page 61) or using multi functions model.
Function
Sets the paper size of each paper tray.
C Tray-1, Tray-2, Tray-3, Tray-4
Selects the Control Panel reset time.
C None, 30 seconds, 1 minute, 2 minutes,
3 minutes, 4 minutes
Sets the Energy Saver mode and time.
C None, Energy save mode, Sleep mode
Energy save mode timer : 1-120 minutes
Sleep mode timer
Sets the on time and off time for Energy Saver
mode.
C Start time - End time
Selects the message language of the display.
C English, French, Spanish
Sets the paper tray for special paper (ex: colored).
C None, Tray-1, Tray-2, Tray-3, Tray-4, Sheet
Bypass
Sets the paper tray for special paper (ex: colored).
C None, Tray-1, Tray-2, Tray-3, Tray-4, Sheet
Bypass
Sets the panel touch sound.
C Off, Soft, Loud
Beep sound when original is set on the platen.
C OFF, ON
Beep sound when original is set in the ADF.
C OFF, ON
Monitors copy usage of each department.
(1) Copy usage of each department
(2) Copy limit of each department
(3) Copy number of each department
Sets the date & time
Sets daylight saving time
C OFF, ON
Sets user IP address
C 3 digit
4
Sets the subnet mask
C 3 digit
4
Sets the gateway address
C 3 digit
4
Function
Initial
Setting
*
Consult
your
service
technician.
1 minute
Sleep
: 1-120 minutes
English
NONE
NONE
Soft
OFF
ON
Consult
your
service
technician.
ON
31