Setting; On Start; Standby Mode - Eiki EK-100W Owner's Manual

The projector has "Setting" menu that allows you to set the other various functions described as
follows.
1 Press MENU button on the remote control or
top control to display screen menu. Press
 button to select "Setting", then press
the OK button.
2 Press button to select the item you
want to set, press the OK button.
3 Press button to adjust the item, then
press the OK button.

On start

Enable the projector to be turned on
automatically just by connecting the AC
power cord to an outlet when this function
is set to On.
On
Start the projection immediately, enter
countdown display.
Off
Start up in the standby mode.

Standby mode

This function is available when operating the
projector via network.
Press button to select the item below:
Eco.
Restrict some functions in the standby mode to
reduce power consumption. In this case, you
cannot use network functions and some RS-232C
commands.
Normal
Do not restrict network function and serial
communication function even in the standby
mode.
38

Setting

Setting menu
Setting
On start
Standby mode
High land
Lamp control
Cooling fast
Closed caption
Key lock
Iris
Terminal
Sound
HDMI Setup
On start
Setting
On start
Standby mode
High land
Lamp control
Cooling fast
Closed caption
Key lock
Iris
Terminal
Sound
HDMI Setup
Standby mode
Setting
On start
Standby mode
High land
Lamp control
Cooling fast
Closed caption
Key lock
Iris
Terminal
Sound
HDMI Setup
Off
Eco
Off
Normal
Off
On
Computer 2
Off
Eco
Off
Normal
Off
On
Computer 2
Off
Eco
Off
Normal
Off
On
Computer 2