Menu Bar - Eiki EK-100W Owner's Manual

Menu bar

①
②
③
④
⑤
⑥
① Display
- Adjust computer parameters to match with VGA input signal format: Auto PC adj., Fine sync,
H Position, V Position and H.Size.
- Aspect: Normal and Wide.
- Project way: select a project way among Front, Rear, Ceiling/Front, Ceiling/Rear, Auto ceiling/
Front and Auto ceiling/Rear.
- Menu position: set the menu's position on the screen.
- Background display: set the background display color.
- System: select a system signal format to match the input source.
② Color adjust
- Image mode: the available image modes is Standard, Dynamic, User Image, Colorboard,
Blackboard(Green) or Cinema.
- Image color adjust:
If a computer is selected as a signal source, the following image adjusting options are available:
Contrast, Brightness, Color temp., White balance (R/G/B) and Sharpness.
If video equipment is selected as a signal source, the following image adjusting options are available:
Contrast, Brightness, Color, Tint, White balance (R/G/B) and Sharpness.
③ Setting
Configure basic operation settings of the projector: On start, Standby mode, High land, Lamp control,
Cooling fast, Closed caption, Key lock, Iris, Terminal, Sound and HDMI setup.
④ Expand
Configure expand operation settings of the projector: Language, Auto setup, Keystone, Logo,
Security, Power management, Filter counter, Test Pattern, Network, Factory default and Lamp
counter.
⑤ Memory viewer
Configure operation settings for Memory Viewer function:
order, Rotate, Best fit, Repeat and Apply.
⑥ Info.
The system information of the projector.
30
Basic operation
Main menu
Display
Auto PC adj.
Fine sync
H Position
V Position
H. Size
Aspect
Project way
Menu position
Background display
System
Sub menu
17
0
0
0
Normal
Front
Center
Blue
1024 x 768, 60Hz
Set Slide, Slide transition effect, Sort