Notes & Cautions; Device Explanation - Conceptronic CM2H User Manual

 Do not attempt to disassemble the included power adapter. This may cause high-voltage injuries. If the
adapter needs to be fixed, please contact your dealer or the helpdesk of Conceptronic.
 Keep the CM2H away from excessive moisture.
 Do not immerse or expose the CM2H to liquids.
 Disconnect the power adapter if you do not intend to use the CM2H for an extended period of time.
 Avoid using the CM2H in a location near combustibles.
 Change the battery of the remote control with the same kind when it is weak or dead. Recycle old
batteries where possible. To avoid corrosion, remove the battery when the remote will not be used for
a long time.
 Keep the remote away from excessive moisture; do not drop it.
 Do not operate the remote under intense sunlight.
 NEVER drop, shake or bump the CM2H.
 To prevent overheating, do not cover the CM2H.
Note : The data on the internal harddisk can be fragmented. This can affect the playback of movies. It is
recommended that you defragment the hard disk on your computer once in a while.
On the inside cover of this manual you will find a picture of the CM2H showing all connections and
buttons. The letters on the picture correspond with the table below, to explain each connection and
button of the CM2H.
Description of the letters:
A. DC input connector (5V, 2A)
B. AV output connector
C. HDMI output connector
D. Mini-USB connector
E. SD(HC) / MMS / MS card slot
F. Power LED
G. USB LED
H. HDD LED
I. OK button
J. Navigation buttons
( , , , )
K. Stop / Music button
L. Menu / OTB button
M. Power button
N. A/V LED
O. HDMI LED
P. OTB LED
Q. Infrared receiver
3. Notes & cautions

4. Device explanation

Connect the power supply to the CM2H.
Connect the AV cable to the CM2H.
Connect a HDMI cable to the CM2H.
Connect the CM2H to your computer.
Insert a SD(HC), MMS or Memory Stick in the CM2H.
Indicates that the CM2H is turned on.
Indicates that the CM2H is connected to the PC.
Indicates that the CM2H has HDD activity.
OK button for remoteless operation.
In menu:
During playback:
Short press:
Long press:
Short press:
Long press:
Turn on or off the CM2H.
Indicates that the CM2H is connected with the AV cable.
Indicates that the CM2H is connected with HDMI.
Indicates that the OTB copy function is active.
Infrared reception for the remote control.
Navigate through the menus of the CM2H.
, Increase / decrease volume.
, Fast rewind / fast forward.
Stop the current playback
Initiate the "Music" function.
Return to the menu / root.
Initiate the OTB copy function.
ENGLISH
21