Change The Fan Speed - Philips AC3252 User Manual

» After measuring the air quality
for a short time, the air quality
sensor automatically selects the
color of the air quality light.
» For AC3252, the current fan
speed displays on the screen.
AC3252
» For AC3254 and AC3256, After
measuring the particle matters in
the air, the appliance will show
the PM2.5 level on the screen.
AC3254
AC3256
3
Touch and hold
switch off the appliance.
Note
• After the appliance is switched off by
the on/off button
in the power socket, the appliance will
operate under the previous settings
when it is switched on again.
EN
10
for 3 seconds to
, if the plug is still

Change the fan speed

There are several fan speeds available.
You can choose the auto mode, gas
mode, speed 1, 2, 3, 4 or 5.
Auto (A)
In auto mode, the appliance selects the
fan speed according to the ambient air
quality.
•
Touch the fan speed button
select auto (A).
Gas mode (C)
Note
The gas mode is only available for
•
AC3254 and AC3256.
In gas mode, the appliance is specially
programmed to filter out harmful gases*
optimally. You can select the gas mode
to filter out harmful gases*.
•
Touch the fan speed button
select the gas mode (C).
to
to