Ec Declaration Of Conformity - Black & Decker GL741 User Manual

ENGLISH
If the automatic line feed still does not work or the
spool is jammed, try the following suggestions:
• Carefully clean the spool cover and housing.
• Remove the spool and check if the lever can
move freely.
• Remove the spool and unwind the cutting
line, then wind it on neatly again as described
above. Replace the spool as instructed.
Protecting the environment
Separate collection. This product must not be
disposed of with normal household waste.
Should you fi nd one day that your Black & Decker
product needs replacement, or if it is of no further
use to you, do not dispose of it with household
waste. Make this product available for separate
collection.
Separate collection of used products and
packaging allows materials to be recycled
and used again. Reuse of recycled materials
helps prevent environmental pollution and
reduces the demand for raw materials.
Local regulations may provide for separate
collection of electrical products from the
household, at municipal waste sites or by the
retailer when you purchase a new product.
Black & Decker provides a facility for the collection
and recycling of Black & Decker products once
they have reached the end of their working life. To
take advantage of this service please return your
product to any authorised repair agent who will
collect them on our behalf.
You can check the location of your nearest
authorised repair agent by contacting your local
Black & Decker offi ce at the address indicated in
this manual. Alternatively, a list of authorised
Black & Decker repair agents and full details of our
after-sales service and contacts are available on
the Internet at: www.2helpU.com
Technical data
GL701 GL716 GL720 GL741
Voltage V 230
AC
Power input W 550
No-load speed min -1 6,500 6,500
Weight kg 3.2
8
230 230 230
580 600 700
6,500 6,500
3.2 3.2 3.2

EC declaration of conformity

GL701/GL716/GL720/GL741
Black & Decker declares that these products
conform to: 98/37/EC, 89/336/EEC, 73/23/EEC,
EN 60335, EN 55014, EN 61000, 2000/14/EC,
Annex VIII, Lawn trimmer, L ≤ 50 No. 0344, KEMA
Quality B.V., Utrechtseweg 310, 6802 ED Arnhem,
The Netherlands
Level of sound pressure, measured according to
2002/14/EC:
L (sound pressure) 81 dB(A)
pA
L (acoustic power) 95 dB(A)
WA
L (guaranteed) 96 dB(A)
WA
Hand/arm weighted vibration value according to
EN 786: < 2,5 m/s
Spennymoor, County Durham
UK patent application no. 059745.6
European Community design application nos.
340385-0001 & 339544-0001
2
Kevin Hewitt
Director of Consumer
Engineering
DL16 6JG, United Kingdom
1-11-2005