Check Before Installing; Before Using The Product; Important To Installer - Samsung DV9*K60 series User Manual

Heat pump dryer
Table of Contents

Advertisement

Check before installing

Do not plug the power cord into the wall outlet before completing the dryer
installation.
Check the appearance of the product for any damaged parts before starting the
product installation.
If there are any parts that appear to be damaged, please contact your nearest
Samsung Customer Service Center.
When moving the product, do not move the product by yourself.
Take care of the edges of the dryer as they can be sharp.
Do not install the dryer in a location exposed to frost. Cold water may damage the
product.
Use the product indoors only.
Do not place the dryer on one side when lifting it, and do not move the dryer in such
a way that the internal parts shake. This may result in damage to the internal parts of
the product.

Before using the product

Check if there are any accessories remaining inside the drum.
Plug in the power cord just before operating the product.
Do not block the air inlet hole of the cooling grill at the front of the dryer.
Do not place inflammable objects near the dryer and keep the surroundings clean.
Keep the dryer level with the ground.
Do not remove the adjustable levelling feet of the dryer. They are necessary to keep
the product level with the ground.

Important to installer

Please read the following instructions carefully before installing the dryer. These
instructions should be kept for future reference.
WARNING
Remove the door from all discarded appliances to avoid the danger of a child suffocating.
DV6000K_DC68-03709C_EN (U.K ).indd 15
English 15
4/7/2016 2:17:35 PM

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dv8*k60 series

Table of Contents