CAUTION
When assembling the heat exchanger filter after cleaning it, make sure to that the fixer is
set to the lock position.
DV6000K_DC68-03709C_EN (U.K ).indd 41
4. If the heat exchange filter is not
cleaned regularly, a display indicator
will be turned on or blinked as a
reminder.
If so, check the heat exchanger filter
and clean it to make sure that the filer
is not blocked with lints.
CAUTION
•
Remove the sponge from the filter
assembly and clean it by rubbing in
running water. Dust off the mesh part
with soft brush. After cleaning with
water, dry the Heat Exchanger Filter
thoroughly before reinserting it back.
•
Clean the heat exchanger filter after
every 2 cycle is completed.
•
When the indicator is turned on or
blink, check the heat exchanger and
clean it to make sure that the filter is
not blocked with lints.
5. Clean it with a soft brush or vacuum
cleaner. (It is recommended to clean it
at least once every month.)
CAUTION
Do not touch the heat exchanger with your
hand. Otherwise, it may cause an injury.
English 41
4/7/2016 2:17:42 PM