2.1 Rear Panel
Power: Special Power Adapter.
WAN: WAN PORT(RJ-45) Connect to Xdsl/Cable Modem or
Ethernet.
LAN Port: 4 RJ-45 ports Computer and HUB/Switch connect
Ethernet through these ports.
Notice:
1. please use the special power with this router otherwise it will
be damaged.
2. WAN: WAN port(RJ-45) To connect the router with XDSL or
Enthernet
3. LAN: 4 RJ-45 Port.
4. Reset: Press this button for 3 seconds, the LED indicators of
SYS will fast blink. Loosen the botton the router will restore
default setting and restart automatically.
2.2 Front Panel
LED Indicators
Link/Act
POWER
SYS
Chapter 2 Hardware Setup
Status
Indication for
WAN & LAN
Power
Indication
System
Indication
TEI402M Multifunction Broad Band Router
LED will LIGHT when link is
established LED will blink when
packet is transmitting or receiving
LED will LIGHT when powered on
LED will blink when system work.
LED will dark when system restart
or loading system
4