Config Illuminate; Running Status; Wizard; Please Refer To 3.2 Fast Setup Guide - Tenda TEI402M User Manual

and clone MAC address, please click Advanced Config.
If you need setup DHCP service, please click DHCP Server .
If you need startup DMZ, UpnP and Virtual Service, please click
Virtual Service.
If you need setup dynamic DNS, modify User information, restart
router, upgrade software, backup currently setting, please click
System Tool.

3.3 Config Illuminate

3.3.1 Running Status

1. WAN
Shows the way to access internet and connection status
currently
2. LAN
Shows the current status of IP address, DHCP service, NAT
and firewall of this router.
3. Information
Shows the current running time, number of client and
system version.

3.3.2 Wizard

Please refer to 3.2 Fast Setup Guide.

3.3.3 Advanced Config

3.3.3.1 LAN Port

This page sets the basic network parameters
IP address：the router IP address to LAN. The factory fault
setting is 192.168.0.1.You can change it according to your
TEI402M Multifunction Broad Band Router
11