Wan Port Setup; Mac Address Clone - Tenda TEI402M User Manual

requirements.
Notice: If you change the IP address, you must use the
new IP address to log on the router to manage the WEB
interface and all default gateway of computers of the LAN must
setup as the new IP address.
Subnet Mask: the default setting is 255.255.255.0.
Notice: All subnet mask of computers in the LAN must be
same as the above setting.

3.3.3.2 WAN Port Setup

First please select the way you want to access internet, the fault
way is Dynamic IP .
1. If you access internet by Dynamic IP, you can obtain IP
address automatically from ISP. If your ISP need integrate
the Mac address of your LAN card, you can clone the MAC
address during setting.
2. If you access internet by Static IP and you have fixed IP
address provided by ISP, you will see the following screen
and you need setting the parameters in the menu.
3. If you access internet by PPPoE, you will see the following
screen and you need setting the following parameters:

3.3.3.3 MAC Address Clone

You can select the option to clone the MAC address of the
TEI402M Multifunction Broad Band Router
12