Extron electronics MMX 42 Series User Manual page 4

Quick Start Guide — MMX 42/62 Series
Matrix Switchers
Installation
Step 1
Turn all of the equipment off and
disconnect it from the power
source.
Step 2
Select your mounting option,
install the appropriate brackets
and mount the switcher.
Otherwise, install the four rubber
feet (included) and place the
switcher on a desktop.
Step 3
Connect the video input cable(s).
Using video inputs 1 through 4
(MMX 42) or 1 through 6
(MMX 62) connect video inputs
to the switcher using connectors
appropriate for your model (BNC
or 4-pin mini DIN). See Rear Panel
Cabling in chapter 2, Installation.
Step 4
Connect the audio input
cable(s). Using audio inputs
1 through 4 (MMX 42) or
1 through 6 (MMX 62), connect
audio inputs to the switcher with
connectors appropriate for your
model (5-pole, captive screw
connectors [see at right] or RCA
connectors [see below]).
Tip (Signal)
Tip (+)
Sleeve (Gnd )
Sleeve ( )
MMX 42/62 Series Matrix Switchers • Quick Start Guide
VersaTools
Rack Shelf
Half Rack Width
False Front Face Plate
OU TPU
TS
1
2 1
2 INP UTS
3
4
CO NFI
G
VID EO
AU
Use 2 mounting holes on DIO
MM X SE
RIE
S
opposite corners.
(2) 4-40 x 3/16" screws
OU
TP UT
S
1
1
2
IN PU
2
TS
3
4
CO
NF IG
VID
EO
AU
DI O
MM
X SE
RI ES
Tip
Sleeve
Tip
Sleeve
Unbalanced Stereo Input
Tip
Ring
Sleeve(s)
Tip
Ring
Balanced Stereo Input
0.2" (5 mm) max.
Do not tin the wires!
Right Channel
(Red Jacket)
Left Channel
(White Jacket)
QS-1