Table of Contents
Advertisement
Attribute
9mm
6mm
Creating a Barcode Label
NOTE
• The P-touch is not designed exclusively for creating barcode labels.
Always check that barcode labels can be read by the barcode reader.
• For best results, print barcode labels in black ink on white tape. Some
barcode readers may not be able to read barcode labels created
using coloured tape or ink.
• Use the [ 大 ] setting for [ 寬度 ] whenever possible. Some barcode readers
may not be able to read barcode labels created using the [ 小 ] setting.
• Continuously printing a large number of labels with barcodes can
overheat the print head, which may affect printing quality.
Setting Barcode Parameters and Entering Barcode Data
(
)
/
(
) or (
a character
(
NOTE
Symbols are only available for the CODE39, CODE128, CODABAR or
GS1-128 protocols. When not using symbols, after typing in the
barcode data, press (
label.
Value
2 行 A
2 行 B
1 行 +2 行
1 行 +2 行
Select an attribute
)
Type in the barcode data
) or (
) or (
Details
/
Set a value for the attribute
(
)
(
) or (
) to insert the barcode in the
EDITING A LABEL
)
/
Select
).
Creating a Barcode Label
34
Advertisement
Table of Contents
