Printing Transferred Labels (For Windows ® ); Creating A Barcode Label; Setting Barcode Parameters And Entering Barcode Data - Brother p-touch d600 User Manual

EDITING A LABEL
• If the width of the current tape cassette does not match the width for
the layout, an error message will display when you try to print the
label. Press (
insert a tape cassette of the correct width.
„ Printing Transferred Labels (For Windows
You can transfer labels created with P‑touch Editor to the P‑touch for
printing. To print the labels transferred from the P‑touch Editor, press the
following keys:
è
( ) /
è
( ) or (
/ [Print] è
è
printed (
NOTE
[Transferred Labels] can be selected when a label created with the
P‑touch Editor has been transferred to the P‑touch.
For details on the Transfer Manager, visit our website at
http://support.brother.com

Creating a Barcode Label

NOTE
• The P‑touch is not designed exclusively for creating barcode labels.
Always check that barcode labels can be read by the barcode reader.
• For best results, print barcode labels in black ink on white tape.
Some barcode readers may not be able to read barcode labels
created using coloured tape or ink.
• Use the [Large] setting for [Width] whenever possible. Some barcode
readers may not be able to read barcode labels created using the
[Small] setting.
• Continuously printing a large number of labels with barcodes can
overheat the print head, which may affect printing quality.
„ Setting Barcode Parameters and Entering Barcode Data
( ) è /
/ Set a value for the attribute
è è
( )
32
Creating a Barcode Label
) or any other key to clear the error message, and
è
[Auto Format] (
è
) / Select a transferred label
( ) or ( )
), ( ) or (
[Bar Code] è (
è
/ Select a character
è
) or ( )
è / Select the number of labels to be
).
) or ( ) è
( ) or ( )
è
( ) or (
)
®
/ [Transferred Labels]
è
( ) or (
/ Select an attribute
è
Type in the barcode data
è
) ( ) or (
è
)
è
).