Brother P-TOUCH D450 User Manual page 42

Setting
• Select this setting when
using special tape.
• When using Fabric Tapes or
Heat Shrink Tube, set
[ 特別色帶 ] for [ 兩端空白 ]
before printing. After
printing, remove the tape
cassette from the P-touch
特別
and use scissors to cut the
色帶
tape.
NOTE
• When the cut option is set to [ 不裁切 ] or [ 省帶 ], it stops in the middle
of printing area after the last label is printed. After [ 要送帶嗎 ?] is
displayed, press (
return to the text entry screen.
• When the cut option is set to [ 大 ], [ 小 ], [ 省帶 ], after printing the
message [ 裁切並繼續 ] will display and the P-touch goes into the cut
pause mode. By pressing the Tape cutter lever, you can cut the tape
at the position you set in [ 兩端空白 ].
Description
) or (
Example
• When multiple copies are printed one
time:
23.9 mm
• When a label is printed two times:
1
ABC
23.9 mm
1. 1st print
2. 2nd print
) to feed the tape. Press (
LABEL PRINTING
4 mm 4 mm 4 mm
2
ABC
27.9 mm
) to
Setting Tape Cutting Options
40