Insert A Tape Cassette - Brother P-TOUCH D450 User Manual

• Remove the batteries if you do not intend to use the P-touch for an
extended period of time.
• Dispose of the battery at an appropriate collection point, not in the
general waste stream. In addition, be sure to observe all applicable
federal, state, and local regulations.
• When storing or discarding the battery, cover both ends of the battery
with cellophane tape, to prevent it from short-circuiting.
(Battery insulation example)
1. Cellophane tape
2. Alkaline or Ni-MH battery
USING A COMBINATION OF DIFFERENT BATTERIES (SUCH AS Ni-MH AND
ALKALINE), MAY RESULT IN AN EXPLOSION. DISPOSE OF USED
BATTERIES ACCORDING TO THE INSTRUCTIONS.
 Insert a Tape Cassette
Print head
Tape cutter lever
Tape cassette compartment cover
NOTE
• When inserting the tape cassette, make sure that the tape and ink
ribbon do not catch on the print head.
• If you cannot close the tape cassette compartment cover, check to
ensure the release lever is in the up position. If not, lift the lever, and
then close the cover.
CAUTION
Tape cassette
compartment
Release lever
Tape cutter
Tape exit slot
GETTING STARTED
1
Keyboard
LCD display
Power Supply and Tape cassette
2
10