Clearing Memory; Document Management - Samsung CLX-6220 Series User Manual

Option
User Auth List
PCL Font List
PS3 Font List
Accounting Report
a
Stored Job
a
Completed Job
Net Auth Log
Counter info.
Fax Options
a. This menu only appears when an optional hard disk drive (HDD) has
been installed.
You can also print the machine's status information and browse status
with SyncThru™ Web Service. Open the Web browser on your
networked computer and type the IP address of your machine. When
SyncThru™ Web Service opens, click Information > Print
information.

Clearing memory

You can selectively clear information stored in your machine's memory.
1. Press Menu on the control panel.
2. Press the up/down arrow to highlight System Setup and press OK.
3. Press the up/down arrow to highlight Clear Setting and press OK.
4. Press the up/down arrow until the item you want to clear highlights and
press OK.
5. Press OK when Yes highlights to confirm clearing.
6. Repeat steps 4 through 5 to clear another item.
7. Press Stop/Clear to return to ready mode.
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine.
Option
All Settings
Fax Setup
Copy Setup
Downloaded from www.Manualslib.com
Description
This list shows authorized users who are
allowed to use the email function.
You can print the PCL font list.
You can print the PS3 font list.
This is used only when network authentication in
enabled with SyncThru™ Web Service. Prints
the report of printing out count for each login
user.
This list shows the current status of stored job
on hard disk drive (HDD).
The Completed Job page shows the list of
completed print jobs. The list contains up to 50
files from the latest print jobs.
This is shows users and their IDs who logged in
the domain.
You can view the amount of each category that
your machine has printed so far.
You can set to print the information of a fax
reports.
Description
Clears all of the data stored in memory and
resets all of your settings to the factory default.
Restores all of the fax options to the factory
default.
Restores all of the copy options to the factory
default.
Machine status and advanced feature_ 4
manuals search engine
Option
Scan Setup Restores all of the scan options to the factory
default.
System Setup Restores all of the system options to the factory
default.
Network Setup Restores all of the network options to the factory
default.
Address Book Clears all of the email address entries stored in
memory.
Sent Report Clears all records of sent faxes and emails.
Fax Rcv Report Clears all records of received faxes.
Network
You may set up the network with the machine's display screen. Before doing
that, you must have the relevant information concerning the type of network
protocols and computer system you use. If you are not sure which setting to
use, contact your network administrator to configure this machine to the
network.
1. Press Menu on the control panel.
2. Press the up/down arrow to highlight Network and press OK.
3. Press the up/down arrow until the setup option you want is highlighted
and press OK.
4. Press the up/down arrow until the setting you want is highlighted and
press OK.
5. Repeat steps 3 through 4, as needed.
6. Press Stop/Clear to return to ready mode.
Option
TCP/IP (IPv4) Select appropriate protocol and configure
parameters to use the network environment.
TCP/IP (IPv6)
Ethernet Speed Configure the network transmission speed.
Configure the wireless network environments.
a
Wireless
Clear Setting Reverts the network settings to the default
values.
Network Info. This list shows information on your machine's
network connection and configuration.
a. This menu only appears when an optional wireless network interface
has been installed.

Document management

This menu only appears when an optional hard disk drive (HDD) has been
installed.
This menu allows you to store the scanned documents in a box, set various
options for stored documents and change the default settings for stored
documents.
•To use this menu, you need to create a box first. Creating and editing
the box can only be done through SyncThru™ Web Service (See
"Box tab" on page 1).
Description
Description