Unable To Complete Adaptiq Audio Calibration - Bose VIRTUALLY INVISIBLE 300 Owner's Manual

Unable to complete ADAPTiQ
audio calibration
Listen to the voice prompts for the following error messages:
Error message
1
2
3
4
5
After correcting your problem, you must rerun ADAPTiQ audio calibration (see page
12). If you hear a different error message, contact Bose® customer service for further
instructions. Refer to the contact sheet in the carton.
Problem
The microphone on
the ADAPTiQ® headset
cannot detect sound.
The room is too loud.
The ADAPTiQ headset
is too close to the
speakers.
The listening locations
are too similar.
The ADAPTiQ
headset cannot take
measurements due to
movement.
T R O U B L E S H O O T I N G
What to do
• Secure all speaker cables.
• Make sure the microphone opening on the top
of ADAPTiQ headset is not blocked.
• Your ADAPTiQ headset may be damaged.
Contact Bose® customer service for
replacement parts. Refer to the contact sheet
in the carton.
Rerun ADAPTiQ audio calibration when the room
is quiet.
Move the ADAPTiQ headset farther away from
the speakers.
Move 1 – 2 ft. (.3 – .6 m) away from your previous
listening location.
Hold your head still.
®
E N G L I S H - 1 9