NordicTrack C80I NETL79815.0 User Manual
  1. Manuals
  2. Brands
  3. NordicTrack Manuals
  4. Treadmill
  5. C80I NETL79815.0
  6. User manual

NordicTrack C80I NETL79815.0 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Model No. NETL79815.0
Serial No.
Write the serial number in the space
above for reference.
Serial Number
Decal
CUSTOMER SERVICE
UNITED KINGDOM
Call: 0330 123 1045
From Ireland: 053 92 36102
Website: www.iconsupport.eu
E-mail: csuk@iconeurope.com
Write:
ICON Health & Fitness, Ltd.
Unit 1D, The Gateway
Fryers Way, Silkwood Park
OSSETT
WF5 9TJ
UNITED KINGDOM
AUSTRALIA
Call: 1800 993 770
E-mail: australiacc@iconfitness.com
Write:
ICON Health & Fitness
PO Box 635
WINSTON HILLS NSW 2153
AUSTRALIA
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Keep this manual
for future reference.
USER'S MANUAL
www.iconeurope.com

Advertisement

Table of Contents
loading

Related Manuals for NordicTrack C80I NETL79815.0

Summary of Contents for NordicTrack C80I NETL79815.0

  • Page 1 Model No. NETL79815.0 Serial No. USER’S MANUAL Write the serial number in the space above for reference. Serial Number Decal CUSTOMER SERVICE UNITED KINGDOM Call: 0330 123 1045 From Ireland: 053 92 36102 Website: www.iconsupport.eu E-mail: csuk@iconeurope.com Write: ICON Health & Fitness, Ltd. Unit 1D, The Gateway Fryers Way, Silkwood Park OSSETT...

  • Page 2: Table Of Contents

    Apply the decal in the location shown. Note: The decals may not be shown at actual size. The BLUETOOTH word mark and logos are registered trademarks of Bluetooth SIG, Inc. and are used ® under license. NORDICTRACK is a registered trademark of ICON Health & Fitness, Inc.

  • Page 3: Important Precautions

    IMPORTANT PRECAUTIONS WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read all important precautions and instructions in this manual and all warnings on your treadmill before using your treadmill. ICON assumes no responsibility for personal injury or property damage sus- tained by or through the use of this product.
  • Page 4 22. Never leave the treadmill unattended while it 26. Inspect and properly tighten all parts of the is running. Always remove the key, press the treadmill regularly. power switch into the off position (see the DANGER: drawing on page 5 for the location of the Always unplug the power power switch), and unplug the power cord cord immediately after use, before clean-...

  • Page 5: Before You Begin

    BEFORE YOU BEGIN Thank you for selecting the new NORDICTRACK manual. To help us assist you, note the product model ® C80I treadmill. The C80I treadmill provides an impres- number and serial number before contacting us. The sive selection of features designed to make your model number and the location of the serial number workouts at home more effective and enjoyable.

  • Page 6: Part Identification Chart

    PART IDENTIFICATION CHART Use the drawings below to identify small parts used for assembly. The number in parentheses below each draw- ing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity used for assembly.

  • Page 7: Assembly

    ASSEMBLY • Assembly requires two persons. • To identify small parts, see page 6. • Place all parts in a cleared area and remove the • Assembly requires the following tools: packing materials. Do not dispose of the packing the included hex keys materials until you finish all assembly steps.
  • Page 8 2. Make sure that the power cord is unplugged. Press a Base Cap (74) into each side of the Base (94). Identify the Right Upright (90). Have a second person hold the Right Upright near the Base (94). See the inset drawing. Tie the wire tie (A) in the Right Upright (90) securely around the end of the Upright Wire (81).
  • Page 9 4. Hold the Right Upright (90) against the Base (94). Be careful not to pinch the wires. Partially tighten three 3/8" x 4" Screws (7) with three 3/8" Star Washers (5) into the Right Upright and the Base; do not fully tighten the Screws yet.

  • Page 10: In The Left Handrail (84). If Necessary, Press The

    6. Identify the Right Handrail (85). Remove the tie from the 5/16" Cage Nut (102). If necessary, press the Cage Nut back into place. Hold the Right Handrail (85) near the Right Upright (90). Tie the wire tie (A) in the Right Handrail securely around the end of the Upright Wire (81).
  • Page 11 8. Set the Console Base (64) face down on a soft surface to avoid scratching the Console Base. Remove and discard the two indicated screws (E). Then, remove the Pulse Crossbar (93). 9. IMPORTANT: To avoid damaging the Pulse Crossbar (93), do not use power tools and do not overtighten the #10 x 3/4"...
  • Page 12 10. Firmly tighten the two 5/16" x 1" Bolts (28) and the four 5/16" x 1" Flat Head Screws (18) (only one side is shown). With the help of a second person, hold the con- sole assembly (F) near the Right Handrail (85) and the Left Handrail (not shown).
  • Page 13 12. Hold the Left Upright Cover (27) against the console assembly (F). Align the holes in the Left Upright Cover with the holes in the Left Upright (89). Attach the Left Upright Cover with two #8 x 3/4" Screws (2). Attach the Right Upright Cover (36) to the Right Upright (90) in the same way.
  • Page 14 14. Raise the Frame (56) to the upright position. Have a second person hold the Frame until step 16 is completed. Orient the Latch Crossbar (41) as shown. Make Brackets sure that the “This side toward belt” sticker (H) is facing the treadmill. Attach the Latch Crossbar to the brackets on the Frame (56) with two 5/16"...
  • Page 15 16. Remove the 5/16" Nut (34) and the 5/16" x 2 1/4" Bolt (63) from the bracket on the Latch Crossbar (41). Align the upper end of the Storage Latch (95) with the bracket on the Latch Crossbar (41), and insert the 5/16"...

  • Page 16: How To Use The Treadmill

    HOW TO USE THE TREADMILL HOW TO PLUG IN THE POWER CORD Follow the steps below to plug in the power cord. This product must be earthed. If it should malfunc- 1. Plug the indicated end of the power cord into the tion or break down, earthing provides a path of least socket on the treadmill.
  • Page 17 CONSOLE DIAGRAM FEATURES OF THE CONSOLE You can even listen to your favorite workout music or audio books with the sound system while you get in The treadmill console offers an impressive array of shape. features designed to make your workouts more effec- To turn on the power, see page 18.
  • Page 18 HOW TO TURN ON THE POWER HOW TO USE THE MANUAL MODE IMPORTANT: If the treadmill has been exposed to 1. Insert the key into the console. cold temperatures, allow it to warm to room tem- perature before you turn on the power. If you do See HOW TO TURN ON THE POWER at the left.
  • Page 19 4. Change the incline of the treadmill as desired. The My Trail tab will show a track that represents 400 m (1/4 mile). As you exercise, the flashing To change the incline of the treadmill, press the rectangle will show your progress. The My Trail tab Incline increase or decrease button or one of the will also show the number of laps you complete.
  • Page 20 6. Measure your heart rate if desired. HOW TO USE AN ONBOARD WORKOUT You can measure your heart rate using either 1. Insert the key into the console. the handgrip heart rate monitor or an optional chest heart rate monitor (see page 23 for infor- See HOW TO TURN ON THE POWER on mation about the optional chest heart rate page 18.
  • Page 21 HOW TO USE AN IFIT WORKOUT The workout will continue in this way until the last segment of the profile flashes in the display and the last segment ends. The walking belt will then slow Note: To use an iFit workout, you must have an optional iFit module.
  • Page 22 To re-run a recent iFit workout from your schedule, During a competition workout, the Compete tab first press the Track button. Next, press the in- will show your progress in the race. As you race, crease and decrease buttons to select the desired the top line in the matrix will show how much of the workout.
  • Page 23 HOW TO USE THE SOUND SYSTEM The workout will function in the same way as the manual mode (see page 18).The workout will continue until you reach the goal that you set. The To play music or audio books through the console walking belt will then slow to a stop.
  • Page 24 THE SETTINGS MODE CONTRAST LVL—Press the Incline increase and decrease buttons to adjust the contrast level of the The console features a settings mode that keeps track display. of treadmill information and allows you to personalize If an iFit module is connected, you may also console settings.

  • Page 25: How To Fold And Move The Treadmill

    HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL HOW TO MOVE THE TREADMILL To avoid damaging the treadmill, adjust the incline Before moving the treadmill, fold it as described at the to the zero position before you fold the treadmill. left.

  • Page 26: Maintenance And Troubleshooting

    MAINTENANCE AND TROUBLESHOOTING MAINTENANCE SYMPTOM: The power turns off during use Regularly clean the treadmill and keep the walking a. Check the power switch (see drawing c at the left). belt clean and dry. First, press the power switch into If the switch has tripped, wait for five minutes and the off position and unplug the power cord.
  • Page 27 Next, locate the Reed Switch (52) and the Magnet b. If the walking belt is overtightened, treadmill per- (50) on the left side of the Pulley (49). Turn the formance may decrease and the walking belt may Pulley until the Magnet is aligned with the Reed become damaged.
  • Page 28 SYMPTOM: The walking belt is not centered SYMPTOM: The walking belt slips when walked on between the foot rails. IMPORTANT: If the walking belt rubs against the foot rails, the walking belt a. First, remove the key and UNPLUG THE POWER may become damaged.

  • Page 29: Exercise Guidelines

    EXERCISE GUIDELINES Burning Fat—To burn fat effectively, you must exer- WARNING: cise at a low intensity level for a sustained period of Before beginning this time. During the first few minutes of exercise, your or any exercise program, consult your physi- body uses carbohydrate calories for energy.

  • Page 30: Part List

    PART LIST Model No. NETL79815.0 R0315A Key No. Qty. Description Key No. Qty. Description #8 x 1/2" Screw Reed Switch Clip #8 x 3/4" Screw Reed Switch #10 Star Washer 1/4" x 1 1/2" Screw 1/4" x 1" Screw Drive Motor 3/8"...
  • Page 31 Key No. Qty. Description Key No. Qty. Description Right Tray Base Pad 5/16" Cage Nut 1/4" Star Washer Access Door – User’s Manual Module Housing Note: Specifications are subject to change without notice. For information about ordering replacement parts, see the back cover of this manual.

  • Page 32: Exploded Drawing

    EXPLODED DRAWING A Model No. NETL79815.0 R0315A...
  • Page 33 EXPLODED DRAWING B Model No. NETL79815.0 R0315A...
  • Page 34 EXPLODED DRAWING C Model No. NETL79815.0 R0315A...
  • Page 35 EXPLODED DRAWING D Model No. NETL79815.0 R0315A...

  • Page 36: Ordering Replacement Parts

    ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to provide the following information when contacting us: • the model number and serial number of the product (see the front cover of this manual) •...

Table of Contents