Operating Test - Fujitsu fi-590PRB Operator's Manual

8. Close the Top cover and press lightly until it is
fixed with the tabs.

2.2 Operating Test

After installing the imprinter, test to see if printing can be
performed on the Offline Print Test mode.
1. While pressing the [Hopper Height] button (
) on the operator panel, switch on the scanner.
Continue pressing on the [Hopper Height] button.
Function
Hopper Height
Paper Thicknes s
Thin
Send t o
2. Release the [Hopper Height] button when the
Function Number Display changes from [P] to [b].
3. Place a blank document on the Hopper.
●
Use A4 or Letter size paper. If the size is
ATTENTION
smaller than A4 or Letter, printing may not
successfully complete.
●
Confirm that the Print Cartridge is
positioned within the document width. For
the details, please refer to "2.3 Positioning
the Print Cartridge".
Thick
Scan
4. Press [Scan] button to test.
Paper will be fed into ADF, and the Imprinter will
print out the Print Test Characters starting at 5mm
(±4mm) from the paper's edge.
HINT Print test patterns
Test pattern 1 (Horizontal):
ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`00000000
Test pattern 2 (Horizontal）:
abcdefghijklmnopqrstuvwxyz{|}~ 00000000
Test pattern 3 (Horizontal):
!"#$%&'()*+,-./0123456789:;<=>?@00000000
Test pattern 4(Vertical):
ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`00000000
Test pattern 5 (Vertical):
abcdefghijklmnopqrstuvwxyz{|}~ 00000000
Test pattern 6 (Vertical):
!"#$%&'()*+,-./0123456789:;<=>?@00000000
When multiple sheets of documents are placed in
the Hopper, the Test Print repeats patterns from 1
through 6.
or
The numbering data portion "00000000" changes
from 0 (Zero) with increment of 1(one).
(One test pattern is printed at a time. Press the
[Scan] button to continue printing the next test
pattern.)
3
2
Test pattern print sample
5. To stop Offline Print test mode, turn off the
Scanner.
fi-590PRB Imprinter Operator's Guide | 7
6
5
4
5mm