Fujitsu fi-590PRB Operator's Manual page 15

4. Wipe the following parts using a cloth moistened
with Cleaner F1.
It may take long before the cleaner vaporizes
ATTENTION
if a large quantity is used. When cleaning the
scanner parts, dampen a cloth with modest
quantities of the cleaner. In addition, wipe off
the cleaner completely with a soft lint-free
cloth to leave no residue on the surface of the
cleaned parts.
Back of
the unit
5. Hold the ADF cover with both hands and press it
down slowly.
Press the ADF cover until it is fixed.
Imprinter head
●
When closing the ADF, be sure nothing is
left inside of the ADF.
CAUTION
●
Be careful not to pinch your fingers.
6. Insert the Print cartridge.
(Refer to "2.6 Replacing the Print Cartridge")
fi-590PRB Imprinter Operator's Guide | 13