Transporting And Storing Treatment Of Submerged Motor; Procedure - Outboards Group 60A Owner's Manual

Table of Contents

Advertisement

Trouble Recovery
7.
Give a strong pull straight out to crank
and start the engine. Repeat if neces-
sary.
Treatment of submerged motor
If the outboard motor is submerged, immedi-
ately take it to a Outboards dealer. Otherwise
some corrosion may begin almost immedi-
ately.
If you cannot immediately take the outboard
motor to a Outboards dealer, follow the proce-
dure below in order to minimize engine dam-
age.

Procedure

1.
Thoroughly wash away mud, salt, sea-
weed, and so on, with fresh water.
2.
Remove the spark plugs and face the
spark plug holes downward to allow any
water, mud, or contaminants to drain.
63
3. Drain the fuel from the carburetor, fuel
filter, and fuel line.
4. Feed fogging oil or engine oil through
the carburetor(s) and spark plug holes
while cranking with the manual starter or
emergency starter rope.
5. Take the outboard motor to a Outboards
dealer as soon as possible.
CAUTION:
Do not attempt to run the outboard motor
until it has been completely inspected.

Advertisement

Table of Contents
loading

This manual is also suitable for:

70a

Table of Contents