Table of Contents
Advertisement
Operation
3.
Place the tilt lock lever in the release po-
sition.
4.
Hold the rear of the top cowling with one
hand, tilt the engine up, and turn the tilt
support lever toward you or tilt support
knob into the clamp bracket, and then
place the tilt lock lever back into the lock
position to support the outboard motor.
37
Procedure for tilting down (manual
and hydro tilt models)
1.
Release the tilt lock lever.
2.
Hold the rear of the top cowling with one
hand, tilt the outboard motor up slightly
and pull out the tilt support knob or re-
turn the tilt support lever.
3.
Slowly tilt the outboard motor down.
4.
Place the tilt lock lever in the lock posi-
tion.
Cruising in shallow water
The outboard motor can be tilted up partially
to allow operation in shallow water.
Hydro tilt models
The outboard motor can be tilted up partially
to allow operation in shallow water.
Advertisement
Table of Contents
