Fuel Joint; Fuel Gauge; Fuel Tank Cap; Air Vent Screw - Outboards Group 60A Owner's Manual

Basic components

1. Fuel joint

2. Fuel gauge

3. Fuel tank cap

4. Air vent screw

1 3 4
1. Fuel joint
2. Fuel gauge
3. Fuel tank cap
4. Air vent screw
Fuel joint
This joint is used to connect the fuel line.
Fuel gauge
This gauge is located on either the fuel tank
cap or on the fuel joint base. It shows the ap-
proximate amount of fuel remaining in the
tank.
Fuel tank cap
This cap seals the fuel tank. When removed,
9
the tank can be filled with fuel. To remove the
2
cap, turn it counterclockwise.
Air vent screw
This screw is on the fuel tank cap. To loosen
1
the screw, turn it counterclockwise.

Remote control

4
The remote control lever actuates both the
3
shifter and the throttle. The electrical switch-
es are mounted on the remote control box.
2

Remote control lever

Moving the lever forward from the neutral po-
sition engages forward gear. Pulling the le-
ver back from neutral engages reverse. The
engine will continue to run at idle until the le-
ver is moved about 35° (a detent can be felt).
Moving the lever farther opens the throttle,
and the engine will begin to accelerate.
1
6
1. Remote control lever
2. Neutral interlock trigger
3. Neutral throttle lever
4. Main switch / choke switch
5. Engine stop lanyard switch
6. Throttle friction adjuster
2
3
4
5