Makita HP2032 Technical Information page 6

R
epair
(2) Assemble change plate to lack 12, and clip spur gear 27-38 with change plate as illustrated in Fig.9.
Spur gear 38 clipped with lock plate is assembled to spindle, and lack 12 clipping spur gear 27-38
is assembled to gear housing. And then assemble retaining ring S-15 to spindle to fix spur gear 27-38.
[4] Assembling change lever B
(1) Push lack 12 into gear housing till it stops as illustrated in Fig.10.
(2) Insert change lever B into gear housing turning the arrow to "1" as illustrated in Fig.11.
[5] Assembling leaf spring for change lever A
The above leaf spring is to be assembled between cam housing complete (aluminum) and
cam housing cover (plastic).
Set leaf spring to the concaved part of cam housing complete, and then assemble cam housing cover
to cam housing complete.
Spindle
Change plate
Lack 12
Change plate
Lack 12
2
1
Spur gear
27-38
Retaining ring S-15
Fig.9
Push lack 12 into gear housing till it stops.
Fig.10
Change lever B
Fig.11
Leaf spring
Cam housing complete
Cam housing cover
Fig.12
P 6 / 8