Makita HP2032 Technical Information page 4

R
epair
[4] Removing cam B
Open the jaws fully and take off
flat head screw M6x22 by turning it
clockwise.
<1> Assembling
[1] Lubrication
Apply grease to the following parts
A. Spindle and oil seal 19
B. Spur gear 27-38, Gear complete 8-19-26,
Gear of armature
Spur gear 27-38
C. Cam A and Cam B
Cam A
* Cam B ( factory assembled
to cam housing complete.)
D. Lack 12's teeth, contacting
change lever.
E. O ring 14 and
oil seal 19
O ring 14
Change lever B
Gear complete 8-19-26
Sliding parts with cam B
Oil seal 19
Flat head screw M6x22
Sliding parts with
ball bearing 6202
Spline parts
Spindle
Gear of armature
Change lever A
O ring 14
P 4 / 8
Fig.5
Accepting parts for
steel ball 3.5