Ppoe Tab; Ntp Tab - Swann 4500 Series Instruction Manual

PPOE Tab

PPPOE is an advanced protocol that allows the DVR to be more directly connected
via a DSL modem. This option is for advanced users only.
Option
Enable PPPOE Enable to set up a PPPOE connection.
User Name Enter the username for your DSL account provider.
Password Enter the password for your DSL account provider.
30
The Configuration Menu
Description

NTP Tab

You can configure the NTP server details to obtain current date and time.
Note: If you're using NTP, then it is essential that your Time Zone (see "NTP Tab" on
page 30) and DST (daylight savings time - see "DST Settings Tab" on page 27)
are set correctly.
Option
Enable NTP Enable the DVR to connect to a NTP server.
Interval (min) The amount of time in minutes that will elapse between the DVR
updating its internal clock to match that of the NTP server. The
default period of 60 minutes is recommended.
NTP Server The default server used to obtain accurate date and time.
NTP Port The default is 123. You should only change this if you're using a
different NTP server, and you know they use a different port. If
you're using pool.ntp.org, ensure the port is 123.
Description