Specifications - JUKI LK-1910 Manual

SPECIFICATIONS

Model name
Application
Max. sewing speed
Sewing area
Stitch length
Needle bar stroke
Lift of the feeding frame
Lift of the intermediate presser
Stroke of intermediate presser
Needle (at the time of delivery)
Hook
Feed motion work clamp foot
Number of stitches
that can be stored in memory
Number of patterns
that can be input
Input function
Enlarging/Reducing facility
Memory medium
Bobbin thread counter
Lubrication
Lubricating oil
Sewing machine motor
Power consumption
Weight
MARKETING & SALES H.Q.
✽ Specifications and appearance are subject to change without prior notice for improvement.
✽ Read the instruction manual before putting the machine into service to ensure safety.
✽ This catalogue prints with environment-friendly soy ink on recycle paper.
LK-1910S LK-1910H
For heavy-weight
Standard
materials
2,500rpm (when stitch length is 3mm or less)
0.1∼10mm
Max. 22mm (electromagnetic), Max. 25mm (pneumatic)
―
―
DP×5 (#14) DP×17 (#18)
R-theta intermittent feed (2-shaft drive by stepping motor)
Max. 10,000 stitches
64 patterns
Not provided
20∼200% (1% step)
(by increasing/decreasing the stitch length)
EEP-ROM
JUKI New Defrix Oil No.2 (equivalent to ISO VG32)
400W compact AC servomotor (direct-drive system)
Machine head (include motor) 46kg, control box 16.5kg
8 2 1
- - , KOKURYO-CHO, CHOFU-SHI,
TOKYO 182 - 8655 , JAPAN
PHONE : ( 81 ) 3 3480 2357 2358
- - ,
FAX : ( )
81 3 - 3430 - 4909 , 4914
http://www.juki.com
LK-1920S LK-1920H
For heavy-weight
Standard
materials
60mm (L)×100mm (W)
41.2mm
Standard 4mm (0mm and 4∼10mm)
DP×5 (#14) DP×17 (#18)
Double-capacity shuttle hook
Provided as standard
Centralized oil wick lubrication
Single-phase, 3-phase 600W
LK-1930S LK-1930H
For heavy-weight
Standard
materials
0.1∼12.7mm
18mm
DP×5 (#14) DP×17 (#18)
Max. 360,000 stitches
(Max. 20,000 stitches/pattern)
691 patterns
Provided as standard
1∼400% (0.1% step)
(by increasing/decreasing the stitch
length or the number of stitches)
2DD/2HD 3.5 micro-floppy disk
(EEP-ROM can also be used.)
Machine head (include motor)
46kg, control box 18kg
ISO14001:1996
EMS Accreditation
RE005 REG.NO.JSAE389
HEAD OFFICE
The environmental management system to promote and conduct
➀the technological and technical research, the development and
design of the products in which the environmental impact is
considered,
➁the conservation of the energy and resources, and the recycling,
in the research, development, design, distribution, sale and
maintenance service of the industrial sewing machines,
household sewing machines and industrial-use robots, etc. and
in the sale and maintenance service of the data entry system
and in the purchase, distribution and sale of the household
commodities including the healthcare products.
JUNE, 2005 Printed in Japan(AD)
089