Preparation Of Remote Control; Using Remote Control - Palsonic TFTV1720D User Manual

Remote Control
34.
Press to search forward under DVD mode.
35.
Press to search backward under DVD mode.
While in DVD mode, if LCD setup menu is
used, the buttons for DVD operation on the
remote control is not available.

Preparation of Remote Control

Insert the batteries while observing the correct
(+) and (-) polarities.
1. Refer to the drawing, take the back cover
off of the remote control and remove the
empty battery receptacle.
2. A separating film was applied to the
battery for shipment. Remove this film.
3. Insert the battery into the receptacle and
insert the receptacle into the remote.
4. Under normal use the battery will last for
six months.
5. Take out battery when the remote is not in
use for a long time.
Using of Remote Control
Point the remote control unit from no more than
about 7m from the remote control sensor and
within about 60 degrees of the front of the unit.
The operating distance may vary depending
to the brightness around.
Notes:
Do not point bright lights directly at the
remote control sensor.
Do not place objects between the remote
control unit and the remote control sensor.
Do not use this remote control unit while
simultaneously operating the remote
control unit of any other equipment.
11