Adjustment In Pc Mode; To Enter Into Pc Mode; Pc Signal Format; Use Auto.adj Button - Palsonic TFTV-760 Owner's Manual

Adjustments in PC mode
PC
POWER
CH
VOL VOL
-
+
CH
MENU ENTER
C.SYS SLP
ZOOM CLK
AUTO.ADJ P.M DSP
3
1 2
5 6
4
7 8 9
-
0
--
AV
/
OSD
STILL Treb+
Bass+
POSITION
Bass -
Treb-

To enter into PC mode

Repeatedly press AV button on the remote control or SOURCE button on
the set's panel until the screen display PC, which indicates that the set is
in PC mode.

PC signal format

Please connect VGA input and be sure that there is VGA input signal. The
signal format should be one of the follows:
640 x 480 @60Hz
640 x 480 @75Hz
800 x 600 @60Hz
800 x 600 @75Hz
1024 x 768 @60Hz
1024 x 768 @75Hz
1280 x 768 @60Hz
We recommend you to use 1024 x 768 @60Hz (4:3) or 1280 x 768 @ 60 Hz
(16:9) so that the set can obtain the best picture.

Use AUTO.ADJ button

When PC signal format changes or when you switch to PC mode by AV
button, the set corrects picture automatically including frequency and
phase to obtain the best display. During the process of auto correction, all
buttons on the remote control and set's panel do not work until this
process is finished.
When the set displays some signal formats that are nonstandard and can
not adjust by itself to the best displaying status, now you can press
AUTO.ADJ button to correct the displaying again.
26