Philips AC4004 User Manual page 15

2
1
- Clean the pre-filter when the filter cleaning light flashes to ensure
optimal functioning of the appliance.
1 Unplug the appliance.
2 Place your fingers in the recesses of the side panels and gently pull
the bottom of the front panel towards you. Then lift the hooks at the
top of the panel out of the top of the appliance.
3 To remove the pre-filter, grab the two projections and pull the filter
towards you.
4 AC4004 only: remove the multi-care filter from the back of the pre-
filter.
5 Wash the pre-filter under a running tap. If the pre-filter is very dirty,
use a soft brush to brush away the dirt.
Tip: Alternatively, you can clean the pre-filter by removing the dust with a
vacuum cleaner.
6 Air-dry the pre-filter.
Note: Make sure that the pre-filter is completely dry.
7 AC4004 only: reattach the multi-care filter to the back of the pre-
filter.
Note: Make sure that the front of the multi-care filter is pointing towards the
pre-filter.
8 Put the pre-filter back into the appliance. Attach all hooks properly
to the appliance.
Note: Make sure that the side with the two projections is pointing towards you.
English
15