Reassembly Of Sx1 - Siemens S X 1 Service Manual

S I E M E N S P T E L T D
SX 1 Level 2 Service Manual
8 Reassembly of SX 1
For the reassembly of the SX 1, reverse the disassembly procedures from Step 12
to Step 1. However there are some areas to be taken note of during reassembling
of the phone.
Insert SIM card in the opening with contacts pointing downwards. First (1) push at the
phones edge, then (2) push gently until it engages (make sure the angled corner is in
the correct position).
2
1
2. Make sure the battery cover is properly closed or an error will appear on the Display.
Copyright © Siemens Pte Ltd. Siemens Technical Support Centre
All Rights Reserved
ICM MP CCQ ASP/ASC Page 22 of 40 Internal Use Only