Siemens S X 1 Service Manual page 20

S I E M E N S P T E L T D
SX 1 Level 2 Service Manual
Step 11
Release the clip joining the left and right Keypad
Module Number and the Keypad Flex Module Number
using an opening tool.
Step 11
Fully disassembled Keypad Module Number
Copyright © Siemens Pte Ltd.
All Rights Reserved
ICM MP CCQ ASP/ASC
Push the metal tabs to release the left and right Keypad
Flex Module Number outwards as shown.
Step 12
Remove the Vibrator motor, Side key, and MIC from the
Lower Mounting Frame.
Page 20 of 40
Siemens Technical Support Centre
Internal Use Only