28
en | Troubleshooting
8.2
Resolving problems
The following table is intended to help identify the causes of
malfunctions and correct them where possible.
Malfunction
Unit does not
operate.
No connection
established, no
image
transmission.
2015.02 | v1.0 | AM18-Q0684
Possible causes
Power failure.
Faulty cable
connections.
Incorrect unit
configuration.
Faulty installation.
Wrong IP address.
Faulty data
transmission within
the LAN.
The maximum
number of
connections has
been reached.
FLEXIDOME IP
panoramic 7000 MP
Solution
Check power supply.
Check all cables,
plugs, contacts and
connections.
Check all
configuration
parameters (reset to
factory default if
necessary).
Check all cables,
plugs, contacts and
connections.
Check the IP
addresses (ping).
Check the data
transmission with
ping.
Wait until there is a
free connection and
call the transmitter
again.
Bosch Security Systems