Related Manuals for MAC PARA EDEN3
Summary of Contents for MAC PARA EDEN3
- Page 1 MAC PARA TECHNOLOGY LTD. Tel.: +420 571 842 235 1. máje 823 Tel./fax: +420 571 842 332 EDEN 3 EDEN 3 756 61 Rožnov pod Radhoštìm e-mail: mailbox@macpara.cz Czech Republic www.macpara.com...
-
Page 2: Table Of Contents
Maintenance and repairs ..................14 Material description ....................15 Ground plan ......................16 MAC Para Technology ltd wish you many pleasant flights with your Line plan AC ......................17 EDEN 3 Line plan BD ......................18 Manual for Paraglider checks ................ -
Page 3: Operating Limits
Warning and safety precautions Construction The buyer of this product accepts full responsibility for all risks associated with The EDEN 3 is a second rib diagonal-construction paraglider. Every second main rib is paragliding inclusive of injury and death. Any inadequate use or misuse increases the attached to the lines and other ribs are attached at A, B and C-points thanks to the risks considerably. -
Page 4: Speed System
FLYING OPERATIONS Speed system New glider check and before every flight check In additional to all the usual pre-flight checks, please pay particular attention to the items To fly faster than trim speed the EDEN 3 is equipped with a foot operated original speed in the following checklist: system. -
Page 5: Flight
Flight with speed system strong, take some of the pressure out of the canopy by taking in one or both of the brake- lines (or the C-risers). To make faster flight possible, the EDEN 3 is equipped with a special speed system. Flight To accelerate the paraglider we recommend the following steps: a) extend the speed bar... -
Page 6: Collapse Of The Canopy
WARNING!! In the case of a cravat which pumping of the brakes fails to release - apply Collapse of the canopy 50% -70% brake on the open side of the canopy to stop rotation. Then pull the caught line carefully to release it then pump out the affected side. Take care to avoid applying too Remember this is a glider with unspectacular reactions to disturbances in the air. -
Page 7: Stalls
Recovery Stalls Release the riser at first rapidly but then gently. After the B-line stall on no account just let Turbulence or rapid braking can lead to a pendulum effect, and thus to changes in the go of the B-risers, as this can cause overloading. As soon as the risers have been angle of attack. -
Page 8: Spiral Drive
A pilot who is EDEN 3 is delivered with a stuff-sack, T-shirt, MAC rucksack, speedbar and user manual. dehydrated or not accustomed to spiralling can lose consciousness in a steep spiral dive! Happy landings Peter Recek - Constructeur MAC PARA TECHNOLOGY... -
Page 9: Material Description
MATERIAL DESCRIPTION GROUND PLAN FABRIC OF CANOPY NCV - PORCHER MARINE Wassoilles Rue du Ruisseau B.P. 710 38290 ST. QUENTIN FALLAVIER, FRANCE Extrados - SKYTEX S9017 E77A,E38A - 100% nylon 6.6 , 33 Dtex, 40 g/m2 Intrados - SKYTEX S9017 E38A - 100% nylon 6.6 , 33 Dtex, 36 g/m2 Main ribs - SKYTEX S 9017 E29A - 100% nylon 6.6 , 33 Dtex, 40 g/m2 Ribs - SKYTEX S 09017 E38A - 100% nylon 6.6 , 33 Dtex, 40 g/m2 Reinforcement main ribs - Grille Polyester 200 g/m2... -
Page 10: Line Plan Ac
LINE PLAN AC LINE PLAN BD... -
Page 11: Manual For Paraglider Checks
MANUAL FOR PARAGLIDER CHECKS Line length measurement Check-intervals Lines should be separated and each line measured under a tension of 5 kg. Measurement All paragliders used in flight must be checked at least every 24 months. For paragliders is made from the line karabiner to the canopy according to the DHV method. Rib numbering used by paragliding schools the period is 12 months. -
Page 12: Checks
Name Company Date Signature & Stamp EDEN 3 - Paraglider type: Serial number: Test flown on: producent by MAC PARA TECHNOLOGY Confirmation by dealer: TECHNICAL DATA Eden 3 Eden 3 Eden 3 Eden 3 Eden 3 Eden 3 DHV 1-2...